FAQ: Answer

How much do boreholes cost for a Ground Source Heat Pump?

Boreholes are drilled to a depth of 100 – 150 metres. There can be 2 or more boreholes required dependent on the energy required for the property.

The cost of the drilling and the pipework connections with trenching back to the plant area will cost on average between £10,000 – £18,000 depending on the number of holes required.

More Questions About Ground Source Heat Pumps

Can you retrofit a Ground Source Heat Pump into a property?

Yes, we can fit a ground source heat pump to most properties, so long as there is enough land for the pipework to be laid outside for the collector or enough area of land to drill boreholes. As an example for a 4 bedroom property with 12 radiators, you would likely need 600sq metres of land or 2 x 150 metre boreholes.

How many years will my GSHP run for?

Ground loops have an exceptionally long lifespan and are built to last 50-100 years.

Indoor components usually last up to 20 years – double that of oil or conventional gas boiler components.

Will you carry out a fault-finding service for my ground source heat pump?

Our staff are very experienced with heat pump systems and will attend and identify potential problems – initially there will be a call our charge and then additional work and/or parts can be estimated for.

How do Ground Source Heat Pumps work?

A GSHP uses solar energy naturally stored in the ground. With a stable temperature of between 8 – 12 degrees throughout the year it is a perfect environment to extract energy from. The energy collected from either the ground or water source via collector pipes is converted into useable heat via refrigerant gases and a compressor. This useable heat is used to heat your home in the same way as a conventional boiler sends heat to the radiators, underfloor heating or hot water cylinder so it is ready whenever it is needed.

How much does a Ground Source Heat Pump installation cost?

An example of a typical 4 bedroom property with 12 radiators, with a ground source heat pump installation will cost in the region of £28 – £30k.

How much space do I need for the Ground Source Heat Pump collector?

For a horizontal collector you will need to install pipes 1m apart and 1.2m deep in the ground. The maximum length for a loop of pipe will be 400m but depending on the size of the heat pump required you may require 2 or more ground loops. The average system will require between 600 and 1200 square metres of land. This land must be clear of trees and buildings.

Do I need a 3-phase electrical supply to run a Ground Source Heat Pump?

For ground source heat pumps that are 16kw or above, a 3-phase electrical supply will generally be required.

How much will the Renewable Heat Incentive (RHI) be for a Ground Source Heat Pump?

The UK Government’s Domestic Renewable Heat Incentive (RHI) is calculated by the space heating requirement of the property (detailed on your Energy Performance Certificate)and the efficiency of the heat pump that we install. You can expect payments between £2,000 – £4,500 per annum. Your specific payment will be calculated based on your individual property.

I have a water borehole, can this be used for a Ground Source Heat Pump?

Water boreholes are generally only about 20 metres – 50 metres deep. A Geothermal borehole will need to be at least 100 metres deep and often more than 1 borehole is required.

How much does a Ground Source Heat pump cost to run?

Ground source heat pumps are effectively the cheapest form of heating to run. They can be 400 – 500% efficient or more.

A ground source heat pump generates 4-5 times the energy it consumes. This means that for every 1kw of electricity that you pay for, a GSHP can produce 4-5kw of heat for your home.

Accredited Installer